Search found 9 matches

I have found the problem, easy and cheap to fix. The pipe from the MAP sensor to the inlet manifold was split.

OK I will have a look tomorrow. I forgot to mention that I found the earth strap, from the bulkhead to the engine was broken, I replaced it but it did not change anything. Coulg this have burnt out an ...

My F3p engine suddenly started playing up. In 1st & 2nd gear when I decelerate the engine jerkes, as if it is misfiring. I have changed the plugs, air filter and HT leads. Can anybody give me any ...

I have a r19 ph2 with aircon (This is important). The blower motor has stopped working I have found that the problem is the two power transistors on the control module in the blower box. Renault want ...

I need to replace the rear discs on my R16 rsi (with ABS) can anybody tell me if it is easy to pull the things off with a bearing puller, or is it reallly forced on. I had a bad experience with the fr ...

Have you threaded the cable on the clutch pedal sector correctly? there is a loop on the top of the pedal, that the cable must go through. If that is ok then it must be that the self adjusting mechani ...

I would double check that you have 16.5 volts, if you do then it is the regulator ( the zener diode has gone) You can easily change only the regulator, however if your alternator has done a lot of mi ...

Thanks for the info I have now done the job. For those who wish do venture that way I will give some details of the problems I ran across and how I resolved them. Firstly as you mentioned the ball joi ...

My R19 rsi has just failed the MOT on the inner ball joints on the steering rack. Can I replace them without removing the rack? If so how easy is the job? The car has power steering. Thanks.