 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
sb118
Newbie
Joined: 11 Jun 2005
Posts: 8
|
| Posted:
Sun Jun 19, 2005 11:32 am |
|
OK, the next thing on my ideas list is to rob the electric window system from a higher model and fit it to the clio. (i've got too much free time and it should make it sell quicker when the time comes)
What models have electrics? What bits do i need to nick? I've seen the motors on ebay for about 20 quid a side, but will they match up to the manual door mechanism? (same door for manual and electrics?)
Apart from the motors, what else do i need? I'm assuming the switches can be fudged (nicely) into the dash somewhere, but is there any circuitry involved, or are they plain "straight to the motor" units?
Cheers  |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Mon Jun 20, 2005 12:21 am |
|
RT's etc had leccy windows and central locking.
you need to get the door looms and the window regulators. also get the central lockign motors.
The dashg should have the wiring there for the central locking switch (down by tht e gearlever) but the window switches are in the doors iirc.
pop the door open and pull out the rubber grommet, there shoudl be a large plug in there, which is for the door loom.
you have to take the door pocket thingies as well, plus you get door speaker if you don;t already have them. |
|
|
|
|
srr
Level 8 User
Joined: 02 Dec 2004
Posts: 263
|
| Posted:
Wed Jun 22, 2005 10:00 am |
|
The loom to the door is always the same right?
Only the loom inside the door can be different? |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Wed Jun 22, 2005 11:46 am |
|
no the loom to the door is different on some models Some for example don;t have any plugs goign anywhere near the door frame. |
|
|
|
|
|
|
| |