Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Water pipes
Author Message
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Sun Sep 25, 2005 8:22 am

one of the water pipes connecting to the t-piece on my chamade has gone split the other day letting the water out and making me think the head was buggered for a while .i chopped the edges of the very same pipe and stuck it back on .

but today after a 7 miles drive to work i have seen water vapour coming from under the bonnet as i parked up . opened it and found out the fecking pipe was coming out off the t- piece this time . it was not that hot luckily and hope this did not cause any damage .

i put the pipe back in even tighter with the jubilee clip and sorted fot the time being

but i want to get some brand new pipes for this car as it is quite annoying when one splits and takes all your brand new antifreeze out .

anyone now what type of rating is used for these pipes ? are they all the same ??? (i.e: the top rad pipe and the thinner ones behindthe engine )


can they only be bought from renault ????

would they be the same rating pipes on a 1.8 8v version so that i can cut to shape and use on the chamade 16v????

would it be better to use higher rated pipes??? (like some sell on ebay )
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sun Sep 25, 2005 11:11 am

renault.

totally different from the non 16V cars. The 16V pipes have a whirte membreane in em for aded strength as the systems at a higher pressure.

cherck the T piece itself for holes, pretty much every car I have worked on has a pin hole leak in it. Ok if the clips ahead of it but around the welds etc they go then it just leaks.

blue pipes etc are nicer to look at and they tend to be cheaper than ren gear so go for it if they are cheap.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Sun Sep 25, 2005 11:56 am

blue pipes ? are they stronger ?

can they just be bent to the desired shape ????
James Clio16v
Level 4 User

Joined: 14 Aug 2005
Posts: 80

Posted: Sun Sep 25, 2005 12:07 pm

I think Chris is referring to silicon pipes.

They come in sets designed for the car.

James
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sun Sep 25, 2005 12:13 pm

Yeah silicon ones schaks

like mine

Image

Very Happy
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Sun Sep 25, 2005 12:22 pm

Image

Bit late, but this is what the kit looks like schaks.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sun Sep 25, 2005 12:36 pm

no bottom hose though, must have been too complicated for them to make.

New one of them from Renault iirc is about £70 odd.

I got a brand new one off ebay for a fiver the other day Very Happy
Wicked Neo
FCS Event Manager

Joined: 04 Jan 2005
Posts: 3680

Posted: Sun Sep 25, 2005 12:56 pm

the silicon hose kit from hill power as shown in docs pic is £184.25

Renault 19 16valve
7 Piece water system hose kit

RRP £184.25

if you want them in another colour then you need to add 10%
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Sun Sep 25, 2005 1:10 pm

Quote:
RRP £184.25

if you want them in another colour then you need to add 10%


MEGA BUCKS!!!

You could get lucky though and find a cheap set on E-bay, although I haven't seen one yet.
Wicked Neo
FCS Event Manager

Joined: 04 Jan 2005
Posts: 3680

Posted: Sun Sep 25, 2005 1:14 pm

i keep looking on ebay for them too
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Sun Sep 25, 2005 1:20 pm

There's normaly a set or two going for the clio but would they fit the 19?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sun Sep 25, 2005 1:25 pm

no, well they would fit but not properly
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Sun Sep 25, 2005 2:10 pm

185 quid ???? fecky that

i might as well change the coolant and eventually the gasket frequently instead Evil or Very Mad
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Sep 28, 2005 3:25 am

any idea why there is a plastic ring inside this pipe that went split on my car ????
it looks like its there to not to allow the pipe to bend excessively ,but on the other hand it reduces the inner diameter of the pipe which i think is letting less water through .

its the pipe that connects to the metal t-piece under the dizzy cap ,the other end conects to a metal pipe on the engine head again (L shape)
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Sep 28, 2005 3:48 am

the pipes have various restrictors in them its normal.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Sep 28, 2005 6:19 am

the car is running perfectly fine now that pipe did not any more problems ,the water level is stable and no overheating as usual ,i have been messing around in cardiff city centre for 3 hours today ,stopping at traffic most of the time and it never went over that 1 st line .

waheeey Laughing
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours