| Author |
Message |
GakisClio16v
Newbie
Joined: 26 Jan 2005
Posts: 5
|
| Posted:
Sun Oct 23, 2005 5:25 pm |
|
Engine:
Wossner forged pistons
Arrow forged rods
Compression Ratio 14:1
Lightened and balanced bottom end
Cams with 314°/12,4mm
Kent double valve springs and titanium retainers
50mm Throttle Bodies
8 injectors (4 stock, 4 from Porsche Carrera)
Haltech ECU
9.500rpm Rev Cut
60mm Exhaust
Samco Sport silicone hose kit
Alloy water tank
Alloy power steering tank
Brakes:
Galfer Extreme Disk 280mm
4pot Brembo Calipers from Porsche Boxter
Suspension:
KW VARIANT 2
Powerflex Bushes
890kg
Almost done. Don't know power output but we expect 235+Ps.
Hello grom Greece |
Last edited by GakisClio16v on Sun Oct 30, 2005 11:57 am; edited 1 time in total |
|
|
|
Dan
Site Subscriber
Joined: 28 Jan 2005
Posts: 3547
|
| Posted:
Sun Oct 23, 2005 11:24 pm |
|
nice, if your can get some vids post them up!! |
|
|
|
|
Roger Red Hat
Site Subscriber
Joined: 13 Oct 2004
Posts: 4722
|
| Posted:
Mon Oct 24, 2005 8:58 am |
|
liking the silver and blue. |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Mon Oct 24, 2005 9:02 am |
|
Gotta admire a clio owner that doesn't list bodywork in the spec list 
Nice one! |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Sat Oct 29, 2005 11:35 am |
|
Yo gakis! long time no see....is this your motor? |
|
|
|
|
GakisClio16v
Newbie
Joined: 26 Jan 2005
Posts: 5
|
| Posted:
Sat Oct 29, 2005 1:48 pm |
|
No 
It's my mates, Dimitris.
In the next days were going to RWYB. We hope for 12's
It's going to bei 880kg with driver...
I hope i can post some vids and picts.. |
|
|
|
|
Dr_S
Level 1 User
Joined: 20 Jun 2005
Posts: 34
|
| Posted:
Sun Oct 30, 2005 7:39 am |
|
I bet on low 13  |
|
|
|
|
GakisClio16v
Newbie
Joined: 26 Jan 2005
Posts: 5
|
| Posted:
Sun Oct 30, 2005 7:50 am |
|
We achived 14,00 with 1040kg and gear changes at 8000rpm. I think that with 880kg an gear changes at 9400rpm, we can brake 13's!
A friends Pug 106 t/b with about 220Ps and 850 kg done 12,3sec@402m... |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Sun Oct 30, 2005 7:59 am |
|
A lad called Evismaniac has an 800kg Clio on throttle bodies. It's a Williams engine with a Megane cylinder head that makes about 220bhp.
I went with him 1/4 miling a few weeks ago and his best was a 13.8 I believe. |
|
|
|
|
GakisClio16v
Newbie
Joined: 26 Jan 2005
Posts: 5
|
| Posted:
Sun Oct 30, 2005 11:56 am |
|
That's Mehdis i think...
Mehdi's Clio has standar bottom end end, rev cut at 7600rpm and cams about 286deg.
This Clio has rev cut at 9500rpm, c.r 14:1 and cams 314deg. |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Sun Oct 30, 2005 11:59 am |
|
Yes it was Mehdi's, Evismaniac bought it from him. |
|
|
|
|
Dr_S
Level 1 User
Joined: 20 Jun 2005
Posts: 34
|
| Posted:
Mon Oct 31, 2005 5:59 am |
|
Fiesta Xr2i 1000kg with driver, about 270PS with nitro, best time, 13.7;
but not on offical track, because in our country we have none  |
|
|
|
|
|
|
