| Author |
Message |
StuHough
Level 1 User
Joined: 02 Oct 2004
Posts: 21
|
| Posted:
Wed Oct 06, 2004 9:54 am |
|
Hi
Um whenever I take my 1.8 RT up to the national speed limit she just begins to float thats the best wayof describing it , there is no play at the front wheels however and she has just been fitted with new drop links, the track rodd ends and bottom ball joints look servicabe,
Do you think it is the shockers chaps 
Cheers |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Wed Oct 06, 2004 10:28 am |
|
as always it could be a few things. need to chk everything.
check all nuts and bolts are tight... |
|
|
|
|
StuHough
Level 1 User
Joined: 02 Oct 2004
Posts: 21
|
| Posted:
Wed Oct 06, 2004 11:33 am |
|
Thanks for the advice matey all being well, I will give her a tightnen tomorrow  |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Wed Oct 06, 2004 12:03 pm |
|
this happened on my 19...i tried everything....changed track rod ends, lower ball joints, bearings, ...in the end i bought some new struts for it and only then did i discover that the nut that goes on the top of the strut holding it to the top mountign plate was loose!! this was all that was causing it...none of the other things.
to chk this jack the car up a bit so the weight is off the wheel but the wheel isnt off the ground. then grab top of wheel and see if u can shift it in and out whilst keepin an eye on the strut top nut. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Thu Oct 07, 2004 2:56 am |
|
on the red lag botrh top mounts were buggered.
If you bounced the car whilst lookign at the top mounts you could see movement. When I stuck the new one (still go to do the other) no movement, no knocks and solid as a rock.
But shockers may be a strong possibility as might dodgy/low tyres. |
|
|
|
|
StuHough
Level 1 User
Joined: 02 Oct 2004
Posts: 21
|
| Posted:
Thu Oct 07, 2004 10:34 am |
|
Yep I have seen the offside moving when I bounce it ,you can see it move , do you rekon top mount then or all the shock
Cheers M8s
Stu |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Oct 08, 2004 2:36 am |
|
get a new top mount then see if that sorts it.
But if the cars a high miler then i'd get new top mounts, bearings and struts tbh
That way its all new. |
|
|
|
|
StuHough
Level 1 User
Joined: 02 Oct 2004
Posts: 21
|
| Posted:
Fri Oct 08, 2004 1:08 pm |
|
Cheers m8 ,
R coil spring compressors required to remove the top mounts or is ther a dodge |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Oct 08, 2004 1:58 pm |
|
nope you need spring compressors.
Also get long reach decent ones. The 18 quid halfords efforts I have are crap, got them years back and to lazy/tight to get new ones.
Anyway with those compressors I still have to bounce on the strut to get it down enough to get the nut on. |
|
|
|
|
StuHough
Level 1 User
Joined: 02 Oct 2004
Posts: 21
|
| Posted:
Sat Oct 09, 2004 10:47 am |
|
|
|
|
|
|
