 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
hooverphonique
Level 6 User
Joined: 10 Nov 2005
Posts: 149
|
| Posted:
Tue Apr 18, 2006 5:53 am |
|
Hi everyone,
anybody who knows of an easy method of reattaching the rubber thingy on each side of the rear bumber? it looks like the bumber is made from an upper and lower part, with these 2 pieces of rubber in between round the corners.. i would rather not take the whole thing apart to reattach it (the right one has come off in a small bump-n-run, but nothing seems to be broken)..
regards... |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue Apr 18, 2006 6:04 am |
|
its only clipped in the lower bit, pop it off and you can attaxched it properly from behind, that will stop it slidign back and forth as well. |
|
|
|
|
Chet T16
Retroholic
Joined: 12 Feb 2004
Posts: 5685
|
| Posted:
Tue Apr 18, 2006 6:18 am |
|
Warm water and washing liquid! |
|
|
|
|
hooverphonique
Level 6 User
Joined: 10 Nov 2005
Posts: 149
|
| Posted:
Tue Apr 18, 2006 7:03 am |
|
| Chris H";p="91873 wrote: |
| its only clipped in the lower bit, pop it off and you can attaxched it properly from behind, that will stop it slidign back and forth as well. |
huh.. lower part of bumper is only clipped to upper part, u mean? car is a ph2, btw... |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue Apr 18, 2006 7:11 am |
|
the trim is clipped into the lower bit of the bumper which is clipped to the top part. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue Apr 18, 2006 7:11 am |
|
and I know its a ph2, ph1's are not so gay. |
|
|
|
|
hooverphonique
Level 6 User
Joined: 10 Nov 2005
Posts: 149
|
| Posted:
Tue Apr 18, 2006 7:23 am |
|
| Chris H";p="91895 wrote: |
| the trim is clipped into the lower bit of the bumper which is clipped to the top part. |
right ... i know the trim is only attached to the bottom part.. so what u're saying is, unclip bottom part, attach trim properly, then clip bottom part back on!?
bottom part clips are reached from underneath/inside bumper, i presume.. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue Apr 18, 2006 8:09 am |
|
yes somehtign alogn those lines, when you start to unclip it tyou will see wjhat I mean and there will also be a ton of mud in there. |
|
|
|
|
|
|
| |