Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Dashboard Removal
Author Message
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Wed Nov 23, 2005 7:24 am

[quote="MicKPM"]The Phase 2 Steering Wheels SRS unit has a self contained power source behind the wheel which is totally independant from the cars power supply quote]

I had a feeling that was the case after i'd removed the airbag, just wanted to be extra safe before hand seeing as I had no idea Smile
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Wed Nov 23, 2005 8:15 am

Well I removed the airbag from the wheel. Then proceded to remove these two bits:
Image
http://img489.imageshack.us/img489/7306/dscf00910wa.jpg

The left hand thing I guess is the supply as the light from it has been flashing for two years. I'm guessing this meant the supply was knakered Smile No idea what the right hand bit was unless it's a battery.

Anyway have put the airbag back on minus these two items (whilst I wait for a 16v wheel to become avaliable somewhere) these should render the airbag inaffective, I Hope Rolling Eyes .
MicKPM
Affiliate

Joined: 28 Jan 2005
Posts: 360

Posted: Wed Nov 23, 2005 4:19 pm

No, the metal (Silver thing) on the left is the controller/detonator/sensor unit. The white thing on the right is the battery cells and retails at around £110 from Renault still so keep it handy for an eBay sale later! You can stop the warning LED flashing by unplugging the battery from the main unit to prolong it's life however if the light is flashing at a steady, constant rythum then then it means the bag is not connected. Any other pattern will denote a different issue... ie flat battery, faulty controller etc

Dialog's say's that once the battery low light starts flashing you have about a month IIRC to get it replaced but I guess most people just leave them to go flat at the price of getting the cells replced. I guess that's another reason why they went for a vehicle powered unit to, not to mention the obvious safety issue to!
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Wed Nov 23, 2005 4:30 pm

Why would you want to replace an airbagged wheel for a non airbagged one?
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Nov 23, 2005 4:34 pm

huwwatkins wrote:
Why would you want to replace an airbagged wheel for a non airbagged one?


eehh cause airbags are a piece off poo
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Wed Nov 23, 2005 5:08 pm

schakal wrote:
huwwatkins wrote:
Why would you want to replace an airbagged wheel for a non airbagged one?


eehh cause airbags are a piece off poo


LOL Correct Smile
Just don't like them and as my airbag wheel is in pieces now I thought I may as well get a nice 16v one Smile
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Wed Nov 23, 2005 5:09 pm

MicKPM wrote:
The white thing on the right is the battery cells and retails at around £110 from Renault


Oh My Lord!
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Nov 24, 2005 5:19 am

A peice of poo that might save your life one day?
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 7:51 am

That's true Huw. Oh what to do Confused

Carrying on the title of the subject, I got the dash to move enough to dislodge the heater unit and get the matrix out
Image
http://img479.imageshack.us/img479/7271/dscf00959tk.jpg
Image
http://img479.imageshack.us/img479/2783/dscf00965sa.jpg

Flushed it in the bath and a shit load of crapola came out.
Got a new one on order will be at my factors tomorrow morning so will hopefully get it all sorted Very Happy
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 7:58 am

The current state off the car!
Image
http://img473.imageshack.us/img473/2599/dscf00976di.jpg

Just been rained off. Wasn't too bad 'till it started hailing then it started to hurt Smile
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Thu Nov 24, 2005 8:36 am

make sure when you put it back you line it up with the doorcards with doors closed, equal gap each side etc., it's annoying when you do it and think its central then get in and shut the door and see its a bit skewed to one side and you have to slacken off all the nuts and screws again to shunt it over a couple of mm Rolling Eyes
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 9:02 am

Cheers Neal Smile
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 9:13 am

On closer inspection of the old matrix (running the shower hose through it), I have noticed that only 3 three of the copper pipes seem to be getting a decent flow of liquid through them. I've been banging away Shocked on the thing for an hour and a shitload of crud has come out but there's still no sign of flow through them. They must be totally clogged! So that's off to the bin while I await my new one Very Happy
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Thu Nov 24, 2005 9:15 am

blast it through with high pressure from the garden hose attached directly to the outlet of the matrix!
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 9:20 am

Neal 19 16v wrote:
blast it through with high pressure from the garden hose attached directly to the outlet of the matrix!


That's gonna be a bit pricey! I need to buy a garden Smile

I may take it down my folks tomorrow night as they've got some big ass Karcher pressure washer. If I can clear it I may just keep it as a backup Wink
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Nov 24, 2005 11:57 am

Interesting to see what happens, my TD took a while before hot air come out, but once it was going it was nice and warm....
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 12:02 pm

Mine just got luke warm at best. Once you went over 30 it just blew whatever temp it was outside, which at this time of year is pretty unbearable. Especially when I had to pick up my parents from Leicester Square last Friday Rolling Eyes
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Nov 24, 2005 3:03 pm

mate dont fecking bother with the old matrix for the sake of 30 quid ,chuck it in the bin and get yourself a brand new one ,you will thank me for that later
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 3:26 pm

I've got a new one turning up tomorrow. Just fancy cleaning the other one to see if I can get it working (I have a boring life you see Smile )
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Nov 24, 2005 3:33 pm

Sic Puppy wrote:
I've got a new one turning up tomorrow. Just fancy cleaning the other one to see if I can get it working (I have a boring life you see Smile )


the only way to see it working is cleaning it as neal said and chucking it back on filling the system and running the engine

WHY Question
Sic Puppy
Site Subscriber

Joined: 01 Feb 2005
Posts: 728

Posted: Thu Nov 24, 2005 3:37 pm

Why can't you just run hot water though it and see if it gets hot?

But I see your point Wink
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours