Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Changing of the clutch ( now with pics)
Author Message
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 1:29 pm

you mean the one the connect to the front corner of the box? If so i've removed that, also even tho the rear dog bone mount is rattling around now, I still havent been able to pull it right off as there isnt enough clearance there to do it.
jimbo
Level 7 User

Joined: 27 Feb 2004
Posts: 243

Posted: Tue Jun 29, 2004 1:54 pm

ur gunna have to drop the pass side of subby. thatl give u the clearence to lift the bracket over the mount
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 2:24 pm

Ok, which 2 bolts am i looking at to do that? Will i have to remove the pinch bolt inside the drivers footwell for the steering coloumn?

Cheers
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jun 29, 2004 2:41 pm

the frt pass side subframe bolt on mine was hidden behind the plate that the towin eye is attached too...so had to remove that first....and yes pinch bolt will have to be undone...in the engine bay tho i think...pull up gaitor on top of steerign rack where it meets the column.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 3:10 pm

JB, sounds like you've done this before Razz
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jun 29, 2004 3:21 pm

wel not quite...just wanted to tighten the subframe on mine...thats how i found out it was hidden...
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 3:29 pm

Just out of curiousity, this clutch will fit the 16v wont it?
CLUTCH KIT-200mm SACHS R5 GT TURBO-UPRATED 85>
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jun 29, 2004 3:36 pm

well a std r5 turbo clutch is the same code as a 19 16v....so i guess that one should fit
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 3:43 pm

Yeah, only reason I ask is it sais 200mm, which is presumably bigger?
jimbo
Level 7 User

Joined: 27 Feb 2004
Posts: 243

Posted: Tue Jun 29, 2004 4:16 pm

i ran the gt turbo uprated on my tuned 1.8 16v last year. heavy clutch tastic! lol

leave the column bolt in palce wen lowering the passenger side of the rack. to big bolts to lower subframe. 16mm at the front. 19mm at the back. i manged to make about 12inch gap for the box to slide thru the wheel arch. saves lifting 30kg's in and out the engine bay. once ur done, ul find the steering column has been pushed upwards- the actual shaft itself moves about 1inch further toward the driver. get a big socket on the wheel hub and smack it back down with a hammer. sorted
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 4:19 pm

Ah, so that 200mm clutch will fit? You mean the hub on the steering
wheel?

Jimbo, did you not like the uprated clutch? What clutch are you using now?

Cheers
jimbo
Level 7 User

Joined: 27 Feb 2004
Posts: 243

Posted: Tue Jun 29, 2004 4:48 pm

i went back to using the standard williams clutch. the uprated gt turbo clutch liked being abused. held the power real well, but it did only last 6months, until the friction plate springs broke.

yeah, take of the steering wheel boss, then smack the column back down about an inch. ul no u got it right, cus the steering wont screech wen u turn it, and the self cancelling of the indies works! lol

jimbo
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 29, 2004 4:52 pm

Ah, uprated clutch not recommended then? Care to reccomend one?
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Jun 30, 2004 12:06 am

jimbo wrote:
... but it did only last 6months, until the friction plate springs broke...

jimbo


and you dont want that happenin!!! seein as thats what your fixin!

also the williams clutch is the same code as the 19 16v clutch...so no difference
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Wed Jun 30, 2004 3:53 am

So, im better off going for a standard clutch?
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Jun 30, 2004 9:25 am

may as well....its a std car innit
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Wed Jun 30, 2004 2:54 pm

Discovered i'd missed a bolt just above the diff....if I hadn't been told about it, i'd never have found it, so now the gearbox is loose, just need to get that rear bracket off and it should pull free. Smile
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Jul 01, 2004 6:46 am

Right, i've undone the subframe and its dropped about 1.5-2 inches...however it doesnt seem to want to go any further....ideas? Also, how on earth do you get the speedo cable out? Even though i've lowered the subframe a bit I still cannot get the bloody rear engine mount bracket out, its now the only thing stopping the box comig off. Also, how do I get the track rod end ball joint off? i've tried hammering it... Pics will follow later...

Cheers
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Thu Jul 01, 2004 8:40 am

Hit the track rod end from the side with a hammer, hold another one to the back of it at the same time. Should just drop out..."should"
jimbo
Level 7 User

Joined: 27 Feb 2004
Posts: 243

Posted: Thu Jul 01, 2004 8:45 am

have u undone the shock absorber from its top mount, and also the tie bar from the subframe to the inner arch? once theyr free the subframe will drop a good few inches. the speedo cable will come out, when u press the white plastic base of the cable that goes into the box. tho somtimes a good yank can remvoe it easily.

as for the track rod end. put the nut back on a cupla threads, then smack it loads with a hammer. will loosen easily then. jsut dont smack the bare thread, as itl distortreal easily.

jimbo
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Jul 01, 2004 8:55 am

I've removed the tie bar, not done the shoocket yet, will try chets idea for the ball joint. The new clutch arrived today, can anyone tell me what the little packet of grease that comes with it is for?
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours