Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Changing of the clutch ( now with pics)
Author Message
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Thu Jul 01, 2004 9:26 am

greasing up the input shaft where the release bearing runs up and down....

get the shock out of the way..its only two little bolts at the top now if uve got it off the hub....
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Jul 01, 2004 9:42 am

Nope, no luck, tried smacking the ball joint about lots, no go. The speedo still wont come out, which I think means the rear bracket wont come off over it, and the sub frame still wont drop anymore than it has. Things aint looking good.....again...
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Jul 01, 2004 2:37 pm

Got the box off Smile The clutch friction plate seems to have shattered itself, heres a pic :Image

Can't get the subframe far enough down to get the box completley off though, been told I need to slacked the offside bolts too?


Cheers
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Fri Jul 02, 2004 1:47 am

i forgot to ask did u manage to get the rear mount off after all? or is that still floating around in there? maybe thats still stoppin it from droppin
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Jul 02, 2004 3:51 am

I managed to shove it 'up' so it was clear of the gearbox, I did monder if it was stoppin it from dropping, but im not sure.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Jul 02, 2004 8:42 am

Were, i've got the clutch off, all the friction meterial has been stripped! and DAMN, those alllen bolts are on tight!! And here's what you've been waiting for; PICS!
First: The clutch Old and New
Image

Second: The box and Fly
Image

Third: The old friction plate...whats left of it
Image

Fourth: Old pressure plate, looks a 'little' scroched?
Image

Fifth: Some of the only friction material I could find
Image

Also, during taking the clutch off, the rear bracket fell off!
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Fri Jul 02, 2004 8:45 am

nice work matey!
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Fri Jul 02, 2004 12:17 pm

WELL DONE HUW....see told u it ould be done...thats one fucked clutch...either cheap/badly made or more than likely not fitted correctly....or completely ragged to deth by previous owner...Wink
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Jul 02, 2004 1:50 pm

Clutch was made by 'Valeo' i think. Not sure how u incorrectly fit a clutch? Anyway, been trying to get the box back on....no having much luck, any suggestions?


Cheers
jimbo
Level 7 User

Joined: 27 Feb 2004
Posts: 243

Posted: Sat Jul 03, 2004 2:16 am

u used a clutch allignment tool to line the friction plate up correctly? otherwise the input shaft will not go into the splines on the friction plate no matter hpow hard u try.

jimbo
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Sat Jul 03, 2004 4:24 am

Yup, used one of those blue plastic renault alignment tools
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Sat Jul 03, 2004 3:35 pm

Right, i've got the box back on and most of the bolts in, just need to get the rear mount back on and everything should be on its way to being finished Very Happy Whats the best way to get that thing back on?
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Sat Jul 03, 2004 3:35 pm

just keep fiddlin mate
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Sat Jul 03, 2004 4:22 pm

Just out of curiousity, does anyone have any ideas why the clutch just went like that?
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Sat Jul 03, 2004 8:19 pm

No idea but thats what my last one did. here was pieces of metal embedded into the gearbox casing from that Very Happy
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Mon Jul 05, 2004 6:23 am

Almost finished now Smile just need to finish off putting the struts and shafts back in Smile
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Jul 05, 2004 9:52 am

it had over heated, hard driving thus slip had caused it to over heat then when he got to 3rd gear the clutch lining just blew apart.

When clutches go its usually during a change as the lining is no longer clamped in.

When I blew my sisters the clutch plate lost bits of metal like Chets did.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jul 06, 2004 8:00 am

Well, everythigs back in now and amazingly the clutch works, i'd just like to say a big thank you to everyone who replied and helped, probably wouldn't have got it done without help Smile Especially cosidering it was a job I thought i'd never be able to do. Advise was a lot more forthcoming that in my post on 'another' forum Razz
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jul 06, 2004 8:22 am

glad its working....nice one mucker!!

now it needs a good hard drive!...but easy on the clutch eh Wink
Ben
Level 5 User

Joined: 18 Mar 2004
Posts: 112

Posted: Tue Jul 06, 2004 11:04 am

Treat the old girl nicely though!!!
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours