what will i do today then?

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

so what will i do today.

fit a new wire to the black exec to get its oil level and oil light working?

Hope neos parcel arrives with my stuff if hes sent it for the black exec?

or do i drain the blue hatches fluids for engine removal action?

or do I rag the blue hatch around with no downpipe on?

change the rear caliper on the blue hatch to stop the leak?

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

or look at the black execs oil leaks and either sort them or somehow collect the dripping oil and clean the drive

Site Subscriber Joined: 11 Feb 2005 Posts: 2929

Pick one job at a time chris or you'll never get anything done.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

I could also walk over to the wurth shop and buy lubricants, kinky.

need to get me some wurth 40 below, great stuff! dunno if its called 40 below these days though.

yeah I know matey, but the list is a list of single jobs!

Site Subscriber Joined: 11 Feb 2005 Posts: 2929

work through it methodicly then Chris.

If you pull your finger out you could do them all.

Forum Moderator Joined: 18 Feb 2004 Posts: 7432

Do the jobs on the exec as first priority, sooner that's done, sooner you can get it up for sale...

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

the exec needs a starter heatshiled (neo) and centre caps (neo), the oil wire, I could do it right, you know unwrap the loom after draining the coolant, but thats to much hassle.

I need to get it welded, it was gonna go to docs for that, but tbh I can get metal etc easier up here so he can brind the welder up when he comes up aftyer he gets the engine off of you neal.

in fact io need some bits, everyone go to the wanted section and if you have the bits let me know!

Forum Moderator Joined: 18 Feb 2004 Posts: 7432

I hope neo didn't charge you for that starter heatshield! Wink

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

nope.

i hope hes sent them! lol

Forum Moderator Joined: 18 Feb 2004 Posts: 7432

He will have if he said he would.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

yeah I know he will, but theres a wicked neo delay which cannot be explained by the current phsics understanding!

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

well I broke the main earth lead bolt like a muppet, I cleaned up the underside so now theres not much oil down there and I have just cleaned the drive.

All black exec btw.

I had an arse aroudn with the oil wire but fook that today.

Still not had my wheel picked up, so I cannae got for a wander over to wurth.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

my wheels been picked up, dvd's dropped off, I was excited as I thought it was my stuff from neo but no! lol

got to work on the blue hatch, bumpoer is off, and splitter sorted. the driveshaft roll pin has been removed and the box is drained.

gearbox oil is still draining, only been half an hour! Should be nearly fecking done now, its the last dribble as always thats the arse.

Might get my fat arse moving and walk over to wurth.

Might not.

need food first.

Site Subscriber Joined: 11 Feb 2005 Posts: 2929

I got that top hose Chris. (thanks)

Put the cabby's battery on charge too so we'll see what happens after work.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

cool.

Well i am drainign the power sterring oil, uits bright pink due to water. its taking a long time. I need to get as much of it out as I can, so the oil cooler is off and was blowtorched to get the remains of the oil out, the pies are dribblign at the moment. I am tryign to remove the long pipe on the drivers side that runs along the subframe.

got the front bolt free.

the back one is under the drivesgaft so i am remioving that as it needs to come off anway!

FCS Event Manager Joined: 04 Jan 2005 Posts: 3680

caps and sheild are being posted tomorrow Chris.

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

ok mate, no bother!

i burnt my foot in a stupid accident.

It involved a ps pipe, a boiled kettle and a muppet of an operator!

FCS Event Manager Joined: 04 Jan 2005 Posts: 3680

just one quick thing, the only ones i have found are the off colour ones, they are metal but darker than the alloys, are you ok with those or would u like me to dig deeper thru my old dots garage to get the right colour ones?

i think they look quite effective being a slightly diff colour lol

[img:900:398:49d4821461]http://wicked-neo.luon.net/snow2.jpg[/img:49d4821461]

Forum Moderator Joined: 02 Mar 2004 Posts: 19978

whatever you have is cool mate.

i assuem they are clio dark ones then yeah?

FCS Event Manager Joined: 04 Jan 2005 Posts: 3680

They are the ones that came with UCC so i dont know thier origin but yeah i assume they were once on a clio

Mr Quoter-vator Joined: 16 Feb 2004 Posts: 7405

i dislike the off coloured ones.