Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Arse!
Author Message
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Feb 02, 2005 7:48 am

Isn't it annoying when you get the wrong part? It delays thinsg and is a minor irritant.

Its even worse when its caused by your own stupidity!

As we all know the laguna has a dodgy heater matrix pipe, this is quite an involved affair and with VAT its 70quid from renault. So I saunter to the scrappy.

I removed this

Image

from a laguna, it put up a mighty fight I add. It came from a 1.8 RN SPI model. Looked the same so i thought yeah it'll fit. It also had a mint condiction bleed scrrw which is where they go.

So got home and chucked it in the bath and flushed it, full of crap.

Image

I had thought when I was at the scrappies it may not be the same. So i just checked dialogies.

What I have is 7700417717, what I need is 7700838037. This pipe will not fit and has a couple extra bits of pipe.

I am not amused.

from the scrappy I got a duff horn, it works but sounds like a duck farting, orion trim panel (in the 1st pic), laguna handbook and a Spare MAP sensor. Fiver was the cost.

Pissed off about this hose though. If anyone needs it I'm open to offers!
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Feb 02, 2005 7:50 am

arse
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Feb 02, 2005 7:57 am

i do that shit all the time chris ,but the friendly local scrap yard person always accepts returns . cause he knows i am a loyal customer and will keep coming back . Laughing
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Thu Feb 03, 2005 6:39 pm

I know of not one other person that would get away with doing that in a bath
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Fri Feb 04, 2005 1:49 am

ive put bits in the bath before but the hassle of cleaning the grime stuck to the bath out after means i dont bother any more. but its good for using a hot shower to wash things out
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Feb 04, 2005 3:30 am

I do all sorts in the bath. I have a very understanding family considering I am the only other male!
stan
Gay Rights Activist

Joined: 07 Apr 2004
Posts: 1268

Posted: Fri Feb 04, 2005 4:04 am

a dishwasher also makes a good parts cleaner!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Feb 04, 2005 4:11 am

a decent sized range oven is great for heating the head up to remove/fit valve guides. Its also good for heating split casting up to weld.

Washing machines are great for wiring looms and HT leads.
stan
Gay Rights Activist

Joined: 07 Apr 2004
Posts: 1268

Posted: Fri Feb 04, 2005 4:18 am

hmmm cant say ive tried the washing machin...might be a tad noisey!
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Fri Feb 04, 2005 4:20 am

i use the oven to heat the small plastic bits after spraying them ,not on full wack though . i heat the oven up turn it off and put the bits on a tray leave there for ages and serve them cold
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Feb 04, 2005 4:22 am

washing machines not bad, I did however stick a very oily engine loom in and it marked the door seal, never came out.

Its not to noisy really. It removes all the tape etc so you need to re-tape but it comes out spanking.

A 90 degree wash of HT leads makes them supple again.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours