Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 second fog light
Author Message
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 8:02 am

OK I wish i could remember more of GSCE science, should i wire it up in parallel or serial with the one thats already in there?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sat Feb 19, 2005 8:06 am

parrallel you fool, you'll kill us all with that sort of electronics knowledge!

In seires the lights would get 6V each (when the engines running closer to 7V each), in parrallel they both get battery voltage but half the current.

Anyway why? Don't me your gettign 2 up 2 down cibbies...
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 8:08 am

i remember all the V=IR stuff, kirchoffs law and all that bollocks, just couldnt remember how it applies Smile

im putting the lamp in the spare hole on my reflector strip, nice symmetry! Smile
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 8:10 am

quite like the phase 1 style look of it without the strip there actually...apart from the gaping holes in the tailgate.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sat Feb 19, 2005 8:15 am

twin rear fogs are not normally supplied by manufacturers, Do you know why? Cos due to the vechile construction thingy it has to have a certain wattage 20W and it is preffered to have only 1 rear fog so it is clear what it is.

Sad but true.

On ph1's all you do is poke the blank out on the light unit and stick in a bulb, job jobbed
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 8:20 am

im using the bulb holder out of my other car

the hole is blanked off on the spare side of the panel, but you can just cut it away, the little clips are there underneath.

where is the foglight on the phase 1? in the clusters?

i hate cars with only one reverse light by the way, especially if its a fog light on the other side so one side has red the other side has white.. GAH!
Wicked Neo
FCS Event Manager

Joined: 04 Jan 2005
Posts: 3680

Posted: Sat Feb 19, 2005 8:38 am

i've done the same on my phase 2, i bought a new reflector strip for it from ebay so used the fog light housing from the orginal and wired it up in parallel.

Looks so much better with 2 fog lights in it, looks right if u know what i mean, always looked as if one light has blown when you only have the standard one fog light in the strip.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 8:55 am

hiw did you get the housing out of your old one? its fitted in from the inside, then the transparent bit seems to be moulded/glued on.
Wicked Neo
FCS Event Manager

Joined: 04 Jan 2005
Posts: 3680

Posted: Sat Feb 19, 2005 9:09 am

2 flat head screwdrivers, it is purely a clip fitting, 2 lugs, one either end of the bulb holder and u should see 4 grooves, 2 at the top, 2 at the bottom where u can slide down a flat head screwdriver, i just unclipped one end lug using a flat head, then same end with a flathead in top and bottom groove and prised it out.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Sat Feb 19, 2005 10:27 am

oh right, thought about that but it looked like it would break so i just cut the blanking plate out instead
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours