Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Bearing size
Author Message
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Wed Mar 09, 2005 5:09 pm

How do I know what mine is? Theres 2 different sizes and I need to know so I can get an inner passenger side gater. Car is a 95 M TD.

Cheers
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 10, 2005 1:29 am

you want the inner gaiter for the passenger side? Why do you need the bearing size?

The bearing on the inside is the same on them all as all the shafts taper down at the box end.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Mar 10, 2005 5:10 am

I dont know but according to Eurocarparts and my local factors there are two different types. I mean Euro has these two:

656745111 INNER CV BOOT KIT .
INNER N/S BEARING=23.8MM

AND

656745161 CV BOOT KIT INSIDE DIA 25.80mm
INNER N/S BEARING=25.8MM

So is it the 23.8 or the 25.8? I will admit, I have no f00king idea...
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 10, 2005 5:25 am

strip it and measure it like everyone else would have to.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Mar 10, 2005 7:29 am

Thats just a pain in the arse, strip it, measure it, put it all back together, get to a factors and then strip it and do it again....not practical seeing as I usually have 1 maybe 2 days of the week to do it in.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Mar 10, 2005 3:40 pm

So is there any other way to find out what one I want apart from taking it apart? Sad
Bridges
Level 3 User

Joined: 13 May 2004
Posts: 79

Posted: Thu Mar 10, 2005 3:45 pm

Try another supplier young man. maybe another parts book might shed some light..
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Mar 10, 2005 3:53 pm

Aha! Dialogys to the rescue, it reckons its 25.80mm, so I can assume that to be correct?
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Thu Mar 10, 2005 3:55 pm

dialogys seems to indicate 25.8mm so go for that one.

if it dont fit then u'll just have to swap it again...not the end of the world.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Thu Mar 10, 2005 4:21 pm

Not the end of the world no, but one giant pain the ass Laughing
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Mar 11, 2005 1:26 am

why you changing it anyway? Is it burst?
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Mar 11, 2005 2:41 am

It leaking gearbox oil
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Mar 11, 2005 2:44 am

so will the new one. They all do it. Even new cars do it. I have said this before btw.

Due to the design.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Mar 11, 2005 4:38 am

I remember you saying that, but the large splodges on the drive are worrying Razz its leaking from the outer end of it too.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Mar 11, 2005 6:03 am

it leaks through the bearing, that allows the shaft to get covered in oil and the gaiter.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Mar 11, 2005 6:14 am

Oh right...interestingly enough there was no oil on the floor when I checked this morning
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Fri Mar 11, 2005 7:28 am

mine doesnt leak...or at least not enough to leave marks on the drive
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours