Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Renault 5 Lowered....
Author Message
Parallex
Newbie

Joined: 01 Apr 2005
Posts: 14

Posted: Fri Apr 01, 2005 11:56 pm

Hi guys. Lowered my R5 down on some Spax fully adjustable shocks. 35mm drop on front one notch (50mm) on back.

The front camber is quite deep now, and the tyres are squealing like bitches. What do i do to stop this?!?! Im sure these shocks are the right ones too!

Ben.
david3533
Site Subscriber

Joined: 02 Oct 2004
Posts: 1575

Posted: Sat Apr 02, 2005 1:38 am

you've got to much camber prob around 2 1/2 deg's of -ve camber. I would guess you gtt front struts and it aint a gtt. if that is the case get the gtt top mounts. this should give you around 1 deg -ve camber and get the toe checked.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sat Apr 02, 2005 5:39 am

GTT top mounts will only increase the camber.
u33db
Affiliate

Joined: 13 Jan 2005
Posts: 219

Posted: Sat Apr 02, 2005 8:27 am

Folks, i pointed him in the direction of this site and mentioned the GTT shock issue as it's not a turbo hes got. Apparently he is using Phase 1 GTT shocks but says it shouldn't cause problems as non turbos share the same suspension turret as phase 1's...
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sat Apr 02, 2005 8:33 am

the turret is the same but the top mounts are not
david3533
Site Subscriber

Joined: 02 Oct 2004
Posts: 1575

Posted: Sat Apr 02, 2005 9:39 am

I have gtt koni's and I had to much camber because I used the standard top mounts use the gtt top mounts and they will be ok. believe me I had this problem through ignorance use the gtt top mounts and it will be ok.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Sat Apr 02, 2005 1:08 pm

are the gtt wishbones longer Davy boy?
david3533
Site Subscriber

Joined: 02 Oct 2004
Posts: 1575

Posted: Sun Apr 03, 2005 3:18 am

no its the angle at the bottom of the strut mate if you compare a standard strut and gtt strut there's more angle on the bottom mounts don't know why. hence you have to use gtt top mounts, sounds stupid I know but without gtt you get 2 1/2 deg -ve camber Rolling Eyes and the top mounts do sit differently in the turret.
Parallex
Newbie

Joined: 01 Apr 2005
Posts: 14

Posted: Thu Apr 07, 2005 9:31 am

Anyone want to buy a set of well-restored used GTT PHASE 2 shock absorbers.

Some egit sold me them saying they were phase one! Muggins here believed him, restored them upto pristine condition, and fitted them - wondering why the camber was way out.

Now im looking to buy a new set of phase ones. GASH!

Ben.
david3533
Site Subscriber

Joined: 02 Oct 2004
Posts: 1575

Posted: Thu Apr 07, 2005 9:44 am

why do you want to sell them when all you have to do is buy phase2 gtt top mounts.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours