| Author |
Message |
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Thu Apr 07, 2005 12:43 pm |
|
Can somebody just check that this list of bits is all I need to swap the brakes on my 1.4 to 16V specification? Then I can get on the blower to Paul at Infinicar and get the bits ordered when student loan comes thru' on Saturday! 
19 16V Caliper Carriers
19 16V Caliper Bolts
19 16V Calipers
19 16V Discs (New)
19 16V Pads (New)
Ta in advance!
Ben |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Thu Apr 07, 2005 12:54 pm |
|
if you already have girlings then theres no need for the bolts. |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Thu Apr 07, 2005 1:05 pm |
|
Okeydoke, but other than that don't need nowt else? |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Thu Apr 07, 2005 1:06 pm |
|
you could get the calipers and caliper carriers distinctly cheaper than paul at infinicar. Perhaps someone on here is breaking a 16v? |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Thu Apr 07, 2005 1:23 pm |
|
I'll put me feelers out then Neal! |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Thu Apr 07, 2005 1:24 pm |
|
yes, you do that
(  ) |
|
|
|
|
Rich1
Level 7 User
Joined: 21 Feb 2005
Posts: 224
|
| Posted:
Thu Apr 07, 2005 4:42 pm |
|
well on the clio i'm running 1.2 carriers with 16valve discs and pads cos all the holes line up the same so no need to change the carriers on the clio so i imagine it will be the same for the 19  |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Fri Apr 08, 2005 12:06 am |
|
a 16V disc will never in a million years fit through a 1.2 carrier.
Only a 16V carrier will take a 16V disc.
The 1.2/1.4 carriers are the same but the disc gap is at most 15/20mm.
The rsi/gtt carrier is wide enough to accept the 16V disc but doesn'ty allwo it to mate to the hub. |
|
|
|
|
Rich1
Level 7 User
Joined: 21 Feb 2005
Posts: 224
|
| Posted:
Fri Apr 08, 2005 5:22 am |
|
sorry my bad i've still got 1.2 hubs on with 16valver carriers |
|
|
|
|
Gentle Ben
Site Subscriber
Joined: 07 Oct 2004
Posts: 2281
|
| Posted:
Fri Apr 22, 2005 1:22 pm |
|
One more question my Dad's raised about the brake upgrade - will the 1.4's master cylinder be sufficient to run the 16V brakes?
And I assume my 1.4's brake lines are ample and don't need to be uprated? |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Fri Apr 22, 2005 1:41 pm |
|
its the same master cylinder i think. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Sat Apr 23, 2005 5:02 am |
|
|
|
|
|
|
