Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Fan switch faulty ?????
Author Message
roddy21t
Site Subscriber

Joined: 05 Jan 2005
Posts: 589

Posted: Mon Apr 18, 2005 1:38 am

On my 21t when the engine is hot the fans are not kicking in ....but if i wiggle the plug going into the fan switch (on radiator) the fans make a half hearted attempt to come on,

BUT ...

when i switch on the fans through the manual switch i installed on the dash, the fans kick in with no problems, and then, even if i wiggle the fan switch whilst the fans are on MANUAL, they do not miss a beat,


So is this a faulty fan switch in the radiator ????
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Apr 18, 2005 1:43 am

well the manual switch bypasses the rad switch, so Rebus what have we discovered?

Manual switch bypasses the rad switch so it won;ty make a difference if you wiggle it or pee on it.

But when you wiggle it when the manual switch is left off the fan make an attempt to come on.

2 possible conclusions, rad switch faulty or wiring connector dodgy.
roddy21t
Site Subscriber

Joined: 05 Jan 2005
Posts: 589

Posted: Mon Apr 18, 2005 1:53 am

Yeah thats what i was thinking Chris, im thinking more a fualty fan switch, if it where a dodgy connection then it would surely still cut on/off when i wiggle the plug i reckon .... ??
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Apr 18, 2005 1:55 am

well yeah. Fan switch ain't cheap.

Ever though of binning the 21 switch? stick a 19/clio/whaterver else in there and take the plug off the loom then wire it up.

Both fans will come on instead of sequentially will stop 1 seizing and it will only be on for a few seconds.
roddy21t
Site Subscriber

Joined: 05 Jan 2005
Posts: 589

Posted: Mon Apr 18, 2005 2:06 am

Renault want £42 for a switch Shocked

Would the 19 switch fit in the radiator ??

On the old loom before i made the new one i had the 2 fan wires that went into the plug soldered together so both did come on at the same time, but when i redone the loom i went back to the old set up ...but what i did notice this morning in the traffic jam for ages is that one fan was taking a wee while to cool the engine down, so i might go back the the old set up and solder up the 2 wires again so both come on.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Apr 18, 2005 2:09 am

you not got your old switch?

if so bring it down I have a 19 one here you can have.

I also have a bit of loom and socket you can have an all.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours