| Author |
Message |
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Sun May 15, 2005 9:00 am |
|
OOPS 
Managed to shear a wheel nut whilechanging the front discs today. Haven't got the tools to sort it out myself so I need to get the car down to a garage. Is it safe to drive with only 3 nuts on the wheel?
I guess I should just take it easy, but am i gona loose the wheel on the way there? |
|
|
|
|
huwwatkins
Site Subscriber
Joined: 10 Jun 2004
Posts: 2317
|
| Posted:
Sun May 15, 2005 9:13 am |
|
Nah, will be fine.
Disclaimer: I accept no liability for loss of life  |
|
|
|
|
Dan
Site Subscriber
Joined: 28 Jan 2005
Posts: 3547
|
| Posted:
Sun May 15, 2005 9:57 am |
|
your not having much luck so far with your valver are you? |
|
|
|
|
schakal
Spammer
Joined: 27 Jul 2004
Posts: 5717
|
| Posted:
Sun May 15, 2005 10:25 am |
|
happened to me ,you can drive with 3 nuts as long as you want ,i did drive for 3 weeks .
they just put new threads into the disc in the garage for 20quid |
|
|
|
|
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Sun May 15, 2005 10:37 am |
|
Nah not having much luck. But I did quite clearly state in my project update that i was lookin forward to driving for a day or two without problems so i feel I brought it upon myself in way.  |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Sun May 15, 2005 10:39 am |
|
it's amazing how so many people seem to never have heard of copper grease isnt it... |
|
|
|
|
schakal
Spammer
Joined: 27 Jul 2004
Posts: 5717
|
| Posted:
Sun May 15, 2005 11:23 am |
|
sarky git 
 |
|
|
|
|
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Sun May 15, 2005 12:18 pm |
|
I keep doing things on the car and realising how badly the easiest of jobs have been done in the past. This car hasn't been looked after very well but the bodywork is rust free so thats a bonus. |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Mon May 16, 2005 4:38 am |
|
havent u got a drill? have a go yourself...just dril it out...just be careful not to damage the thread in the hub |
|
|
|
|
Wicked Neo
FCS Event Manager
Joined: 04 Jan 2005
Posts: 3680
|
| Posted:
Mon May 16, 2005 5:01 am |
|
As chris H pointed out in one of my threads, drilling them out is not easy.
I had two of them shear off on the same hub, i got one of them out by removing the brake disc, banging it a few times with a hammer, and then got it out with a pair of mole grips.
the other one is now out too, by applying loads of heat to it with a heatgun at work, it was glowing red then again a pair of mole grips on it and unscrewed it. |
|
|
|
|
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Mon May 16, 2005 3:25 pm |
|
The thread came straight out with just finger power in the end so not that bad.
However managed to do the same to another bolt on the same wheel with no effort at all. Either I'm superman and I don't know it or my wheel bolts are shagged. Decided not to take the chance cos i really don't fancy loosing a wheel at 80 anytime soon so I've got a whole new set and some locking nuts too. Prob a bit ott but I really didn't want to take chances with this. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue May 17, 2005 12:06 am |
|
the wheel bolts on the alloys are very crap and all shear, even on new cars! |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Tue May 17, 2005 3:17 am |
|
ive drilled a few out no problems...just need to make sure u got good drill bits (ie not feckin woodwork ones ) and a steady enough hand to keep it central...
oh and a plug in drill makes it a lot easier than any battery effort |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue May 17, 2005 3:19 am |
|
locking nuts are piss easy to drill, takes a few seconds.
the renaulkts ones even after 10 mins I can't make a dent in them with decent bits and a 500Watt drill. |
|
|
|
|
JB
Mr Quoter-vator
Joined: 16 Feb 2004
Posts: 7405
|
| Posted:
Tue May 17, 2005 3:20 am |
|
hmm come to think of it i think i have only ever had to do it to locking ones....hence i have no locking ones left! |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Tue May 17, 2005 3:33 am |
|
Has anyone else got the official Renault ‘paddy mcgard’ style locking bolts? I got a set brand new in the little Renault Boutique case off ebay about 18 months ago for £3.99 proper pucker they are, and my wheels haven’t been stolen yet!
God I love ebay…
I once got a decat off there…. |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Tue May 17, 2005 3:39 am |
|
nope. I keep meanign to get a set or 2 though, I'm gonna look on e-bay now. |
|
|
|
|
|
|
