Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Dizzy/HT leads for Chris....help
Author Message
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Wed Jun 08, 2005 8:13 am

Had the car serviced, but didn't ask him to do the HT leads or dizzy.

I went into halfords and looked at the two, now HT leads are not a problem but on the chart there are two types of dizzy with stupid names, which i can't remember.

could you tell me which is the right one for mine and do you think i'd be able to change it?

1.4i E7J 1993 engine

Cheers
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Jun 08, 2005 9:09 am

halfords do have quite nicely explianed manfecturer catalogues for everything inc.ignition parts . just look in there for your specific car and engine and get the dizzy cap

its piss easy to chang and make sure the dizzy cap comes with a rotor arm if not change the rotor arm too .
make sure you disconnect the battery while changing them,otherwise you migh end up with electric shock Idea
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Jun 08, 2005 9:24 am

I would imagine its ducelliuer
Gentle Ben
Site Subscriber

Joined: 07 Oct 2004
Posts: 2281

Posted: Wed Jun 08, 2005 9:57 am

Yeah there's loads. Took me forever to find the right one, the two Halfords stock (Ducellier and Magneti Marelli) didn't fit mine but mines carb'd version so may be different.

The only arsey thing on the 1.4's, other than that they're jems!
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Wed Jun 08, 2005 11:24 am

Chris H wrote:
I would imagine its ducelliuer


Whats the difference, will buy that and see about it.

Are they difficult to change?
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Wed Jun 08, 2005 11:25 am

schakal wrote:
halfords do have quite nicely explianed manfecturer catalogues for everything inc.ignition parts . just look in there for your specific car and engine and get the dizzy cap

its piss easy to chang and make sure the dizzy cap comes with a rotor arm if not change the rotor arm too .
make sure you disconnect the battery while changing them,otherwise you migh end up with electric shock Idea


Sorry didn't pay attention to what you said about the difficulty.

Cheers Smile
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Jun 09, 2005 12:10 am

ben there are only 2 dizzies. 90% are duccellieur (or however the hell its spelt) only a few are magneti marrelli and I have only seen 2 magneti marrellis on 19's.

But Ben you probably were getting the one for the C type like a muppet.

The caps are different in that they will not fit enach other!

Changign is easy, 2 screws hold it on.
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Thu Jun 09, 2005 7:21 am

Ok thanks, will have to get them to order one in as they don't have any in stock.

I did the HT leads and it was serviced yesterday, doesnt seem any quicker but it's alot smoother as it used to judder a bit when sat at idle at traffic lights.

My rocker cover is all chipped and so on, so I was going to get a new one and renault want £80 for one!

I kindly thanked the chap and walked out lol Very Happy

Cheers for the info
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Jun 09, 2005 7:36 am

whats wrong with a chipped rocker cover mate ? god you are fussier than me

just get the cover out and give it a good spray .
Benskett
Level 10 User

Joined: 05 Mar 2005
Posts: 570

Posted: Thu Jun 09, 2005 7:49 am

Well I'm trying to improve the overall apperance of the engine bay. It looks ok apart from the rocker cover has no paint on it see.

It's all chipped and looks utter poo.

I'd take it off, but I don't know how and I'd need another gasket for it and I don't know where to get one of them either.

I admit I am very fussy over things, but if I wasn't the car would look like crap and would have probably died because of the way my mum treated it. Sad

I mean I only just had the oil changed after like 4 years of the same crap.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Jun 09, 2005 9:41 am

just undo the bolts/nuts ,in most cases i noticed they are used to secure the rocker cover to the head Laughing

Image
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Fri Jun 10, 2005 3:26 am

whats that actually meant to be showing schaks Question
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Fri Jun 10, 2005 11:47 am

engine bay / engine /rocker cover
could not find a better picture
but if he knows what a rocker cover looks like ,he should be able to see the bolts/nuts securing it
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours