Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Hub Carriers
Author Message
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Jun 13, 2005 4:23 am

righty how many of you have actually ever had a small bearing front carrier? The 65mm bearing one.

Normal size I have found on both clios and 19' sis the 72mm bearing carrier.

Well today I have my 1st 65mm carrier.

Its the hub from the red 19.

Looks quite strange. Looks stronger tbh! Castings a good bit thicker around the bearing.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Tue Jun 14, 2005 4:22 am

we shall assume its rare then
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Tue Jun 14, 2005 4:30 am

or that nobody else has ever bothered to even check what type theirs are...
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Tue Jun 14, 2005 4:38 am

someone must have replaced a front wheel bearing!

This is the first out of ohh probably 50 that I have done

the hub flange is a different size as well to fit in the bearing.

Machined about 3mm off it.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Tue Jun 14, 2005 4:42 am

well even if they have replaced a bearing, what are the chances they would be able to tell the difference between a 72mm bearing and a 65mm bearing without measuring it, which of course they would have no reason to do.

So if the bearing is smaller, the hub may be stronger, but surely the bearing itself is a bit weaker and wears out quicker?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Tue Jun 14, 2005 4:46 am

need to measure it to get the right bearing.

thats what I was thinking but the ford wrc boys dropped from a bigger bearing to a smaller one due to wear problems.

They use ceramic efforts though.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Jun 14, 2005 5:09 am

I can honestly say I've never had to change the bearings on the front of my TD in the 2 and a bit years I've had it...
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jun 14, 2005 5:14 am

ive changed my frts...twice in 5 yrs, the last set fro gsf only lasting about1-2 yrs.

but cant say ive checked...i do think once i remember asking for the larger one tho.
Gentle Ben
Site Subscriber

Joined: 07 Oct 2004
Posts: 2281

Posted: Tue Jun 14, 2005 11:14 am

Both front ones on mine have been changed but wouldn't know the size, Dad did 'em.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours