Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 TD broken - again
Author Message
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Jun 24, 2005 11:18 am

Got back in my car in town, glow plug light comes on, several seconds later goes off. turn key....engine turning, but not firing. After several attempts of doing this, me dad gets in the car to move it off the starter and for some reason it starts.

I've manage to narrow it down to this. The car will not start off the key with the car in neutral. It will however start if you put it in 1st, turn the key and when the car starts to move off the starter put foot on clutch. Car starts.

Seems like a bit of an odd one to me, can't think why it would do it!

Any ideas anyone?

Cheers

Huw
Nathylad
Level 6 User

Joined: 30 Jan 2005
Posts: 127

Posted: Fri Jun 24, 2005 12:10 pm

Could it be the fuel stop solenoid? I've got a TD and mine went on me last year outside my mates house, the AA wanted £50 to fix it. Managed to get it to the motorfactors and cost me £12.50.
Lindsey
Level 10 User

Joined: 22 Mar 2005
Posts: 621

Posted: Fri Jun 24, 2005 12:41 pm

I'd go for stop solenoid too, after I broke mine (overtightned it) it wanted to start but wouldn't! You can take the plunger and spring out, tape up the wire so it doesn't earth itself (don't re-attach it) and that will let you start the car it just won't switch off with the key then you have to stall it or use the manual stop thingy on the fuel pump!

Glad to see it's only £12 I was going to get one from the scrappers!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Jun 24, 2005 12:45 pm

I would also look at the ignition barrel.

Try waggling the key whilst cranking.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Fri Jun 24, 2005 12:59 pm

I shall do...everything seems to have sorted itself out .... next problem. gearbox/clutch area seems to make a rattle/whirring noise untill i put my foor on the clutch, then its quiet. is this a problem with the thurst bearing or the input shaft?
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Jun 24, 2005 1:04 pm

probably the box, but it could be the bearing.

On th ewhite valver it rattles liek a mofo, dip the clutch the knackered box is silent.

Rev the engine about 4krpm and the release bearing howls
Xvisor
Level 7 User

Joined: 06 Sep 2004
Posts: 230

Posted: Mon Jun 27, 2005 4:23 pm

huwwatkins wrote:
I shall do...everything seems to have sorted itself out .... next problem. gearbox/clutch area seems to make a rattle/whirring noise untill i put my foor on the clutch, then its quiet. is this a problem with the thurst bearing or the input shaft?


Had the same problem few months ago with my car whirring/wining noise, my release bearing had gone. It didn't rattle so could be something worse in this case
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Tue Jun 28, 2005 1:08 am

mine used to make a chundering kinda noise.

like a pair of trainers in a washing machine!
Lindsey
Level 10 User

Joined: 22 Mar 2005
Posts: 621

Posted: Tue Jun 28, 2005 3:31 am

Got a quote yesterday for a stop solenoid - £18.21 from LSUK Shocked No other motor factor in the area do them!
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours