 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
JohnnyRob
Newbie
Joined: 24 Aug 2005
Posts: 1
|
| Posted:
Wed Aug 24, 2005 4:13 am |
|
The toothed spline had gone on the sunroof motor as advised by the previous owner who had removed the motor (I have just purchased the vehicle). I have purchased a secondhand serviceable motor.
On installing the motor I found that the switch activated the motor but the roof only moved a few mms. I assume the motor is out of sync with the roof?
After removing the motor from the mechanism and switching to try differnt positions within the motor within the roof mountings I discover the motor no longer works. I checked the old motor (which I assume worked) but that works neither.
I have checked all fuses below the drivers dash but they are all OK.
Here are my questions -
1. How do I get the motor to work? Have I missed some other fuses? (I have no owners manual) The motor loom includes a 'Webasto' relay - could that have blown?
2. What process is there for aligning the motor position with the sunroof mechanism?
TIA
JR |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Wed Aug 24, 2005 7:58 am |
|
ohh tricky one.
If the relay isn't switching then its safe to assume no powers getting to it so theres a fuse or something somehwere thats popped.
As for a;lignign it its a case of mess about till it works really. |
|
|
|
|
|
|
| |