Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Revs low
Author Message
Nabraxas
Newbie

Joined: 30 Aug 2005
Posts: 18

Posted: Fri Sep 02, 2005 10:35 am

Hello again,
An odd problem with my Clio which I've had since I bought it.
When I start the car it idles at about 1,100rpm and then drops to about 900rpm after a short while, the weird thing is if I just quickly tap the accelerator (Like put it right down but only for a second) it revs slightly but then the revs drop right down and it nearly stalls, it only just recovers.

Also sometimes when I'm driving along and I change gear when I put my foot on the clutch the revs drop right down to idle and on a few occasions at a junction the vehicle stalls, so I have to lift my foot off the clutch to get it started again.

Not sure if this is a common problem or not, any ideas what it could be?
Many thanks.
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Fri Sep 02, 2005 11:02 am

duff road speed sensor.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Fri Sep 02, 2005 11:07 am

sounds like it ,does your milage counter work ?
Nabraxas
Newbie

Joined: 30 Aug 2005
Posts: 18

Posted: Fri Sep 02, 2005 11:11 am

Yeah, the milage counter does work. Everything on the dashboard is working correctly.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Fri Sep 02, 2005 11:20 am

even though the liage works ,your speed sensor connector might be loose or not connected at all and that does cause the engine dieing especially changing gears .i experinced this lately but all cured now

this is the picture of a speeo cable with the speed sensor wires hanging on the right
Image

not sure if another speed sensor can be just connected bycuttin the wires and soldering though

chris would be able to tell us that Question
Nabraxas
Newbie

Joined: 30 Aug 2005
Posts: 18

Posted: Fri Sep 02, 2005 11:26 am

Argh, doesn't look as simple as the electric window switch - bend a bit of metal and yay, it works. Laughing

I'll wait to see what Chris says, he seems to know the answers to everything. Razz
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Sep 05, 2005 12:07 am

road speed sensor may be the problem it may need re-e arthed.

Or the idle stepper motor has a dodgy connection/its knackered.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Mon Sep 05, 2005 7:39 am

chris can you fit swap speed sensors ???? as in cutting the wires on one and installing the thing to the other cable ???? would it work like that
Nabraxas
Newbie

Joined: 30 Aug 2005
Posts: 18

Posted: Mon Sep 05, 2005 3:09 pm

Ok, I found the road speed sensor part, how do I know if it needs re-earthing and where does it get earthed?
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours