Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Laguna Immobiliser query again!!
Author Message
maypen1
Newbie

Joined: 10 Aug 2005
Posts: 4

Posted: Wed Aug 10, 2005 5:50 am

Hi Guys, This is my first post to this site. I have read the Knowledge base article on this topic as well as all the other queries. I still have a problem.
I have a M reg (1995) Laguna which definately has an immobiliser which i cannot disable.There is no LED on the central locking button (contrary to what someone has said in another post) . I obtained two numbers for the code and entered them via the button on the end of the wiper stalk. This did not work.

1) After entering your last number by this method what is the next step
2) If car battery is weak how does this affect the immobiliser
3)If you change the reciever by the mirror, must you also change part of the key

Cheers for any help forthcoming.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Aug 10, 2005 6:16 am

1) it should start
2) depends how weak
3) this is only app to older cars like yours which don't have a rolling code, so if the key matches it should plip and go.

Have to say boy next door had an m plate 1.8 lag and his key didn't work but the car coudl still be driven etc.
maypen1
Newbie

Joined: 10 Aug 2005
Posts: 4

Posted: Wed Aug 10, 2005 9:57 am

Cheers for your reply. Can i just confim what the reasons might be for it not working are:

1) Wrong Code
2) Key not working
3)Ring Reciever not working

The LED on the key still glows. Inside the key i have noticed a small crack on the metal spring which the two batteries rest on. Could this be the cause?

Thanks for any help.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Aug 10, 2005 10:44 am

there is no reciver ring, thats only on the later transponder keys.

if the central lockign isn;t plipping then the immob isn;t going off basically.

go get another key and receiver.
Lindsey
Level 10 User

Joined: 22 Mar 2005
Posts: 621

Posted: Wed Aug 10, 2005 11:09 am

I take it you are definately getting the angle right when plipping? Mine can be a pain to get the right angle sometimes.
maypen1
Newbie

Joined: 10 Aug 2005
Posts: 4

Posted: Wed Aug 10, 2005 12:04 pm

Thanks for answering guys. I tried every which way with the plip. Can you tell us if this guy on Ebay offering to repair the keys is any good.
Thanks!!
maypen1
Newbie

Joined: 10 Aug 2005
Posts: 4

Posted: Thu Aug 11, 2005 10:40 am

Hi Guys,
I got the car going this afternoon. The code i had previously was obtained by someone i knew. It turns out it was the wrong code. I went direct to Renault and they gave me two numbers. The first on worked and turned on the immobiliser. I have no plip for the central locking with this and have to open it manually.

I haven't tried the second number because i am wary of messing it up. Is the second number likely to activate the central locking system. If not how do i get this going.

By the way Renault charged me £17.50 for the code. I could have kicked up a stink but i was not in the mood.

Thanks for your help so far.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Aug 11, 2005 1:40 pm

2 codes? they seem to do this. onyl need 1 code.
don'panic
Newbie

Joined: 21 May 2005
Posts: 9

Posted: Tue Sep 06, 2005 1:45 pm

the key repair on ebay worked on my megane scenic.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours