Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 driveshafts out
Author Message
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Wed Sep 07, 2005 1:51 pm

how does that work ?
got the front springs and struts out allready ,now i want to get the drive shafts out in order to remove the gearbox from the engine .
so what am i removing next
-the calipers,pads
-hub nut
-the 3 bolts holding the shaft to the gb
and pull it out is it ?????
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Wed Sep 07, 2005 2:04 pm

you dont need to remove the caliper or the pads, just the hub nut and the track rod end from the hub. You should be able to twist and pull it about enough to get the shaft out. Then theres the roll pin for the other shaft.

Drain the gearbox before you take those 3 bolts out, or have a catch pan underneath when you do! Wink
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Thu Sep 08, 2005 2:48 am

the bolts sometimes goe shit and start to round, if so bang a 1/2 sockett on and it'll come rite off Wink .

Useless info for the day
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours