Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 sump drain plug thingy
Author Message
simonds1
Site Subscriber

Joined: 29 Jan 2005
Posts: 1108

Posted: Thu Oct 13, 2005 2:10 pm

I remember glancing at something in the Haynes a while back about needing some kinda special Renault tool to drain the oil outta the engine. I'm fed up of puttin me car in the garage for something as simple as an oil change, gonna start doin it meself. But I need this tool thing obviously.

Can I get one from anywhere other than Renault? Or will I have to go straight to Renault to get one? Is it actually a 'special' tool? Or just an allen key or something?
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Thu Oct 13, 2005 2:13 pm

its an 8mm square thing. You can get one from halfords as a 3/8" 'socket' for your ratchet
simonds1
Site Subscriber

Joined: 29 Jan 2005
Posts: 1108

Posted: Thu Oct 13, 2005 2:19 pm

Legend. Cheers Neal!
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Fri Oct 14, 2005 2:13 am

Alternatively you can just use a bit of square bar such as the bit that goes between the handles in an internal door in your house, and an 8mm spanner/mole grips on that Wink
Wolf
Level 1 User

Joined: 06 Dec 2004
Posts: 34

Posted: Mon Oct 17, 2005 4:06 am

I had to replace the diff circlip over the w/e & as part of that I had to drain the gearbox, if this is the same then I did it with a standard socket.
the inside of the plug IS hollowed as if for a special tool but the outer shape is standard six sided nut.
good luck
D.W
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Mon Oct 17, 2005 4:08 am

Hes talking about the sump, as in the bit that holds the engine oil. I assume you didnt drain your engine oil to change the diff circlip! Razz
Tranton
Site Subscriber

Joined: 17 Mar 2004
Posts: 342

Posted: Mon Oct 17, 2005 4:27 am

I usually use a torx screwdriver. I can't remember if my last 19 had the same fitment
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Mon Oct 17, 2005 4:29 am

Tranton wrote:
I usually use a torx screwdriver. I can't remember if my last 19 had the same fitment


are you sure ?
Tranton
Site Subscriber

Joined: 17 Mar 2004
Posts: 342

Posted: Mon Oct 17, 2005 4:41 am

very sure, it's one of the flat rubbersied plugs with a torx fitment.
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Mon Oct 17, 2005 4:42 am

i see ,its not the 16v than
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Mon Oct 17, 2005 4:50 am

not on a renault its not
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours