Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 down pipe qestion??
Author Message
bradharris
Site Subscriber

Joined: 28 Oct 2005
Posts: 247

Posted: Wed Dec 14, 2005 9:50 am

right all i searching for a new down pipe for the 19 16v and i keep comming accross this answer

"sir are u sure u have a cat fitted to your car"!!!
i no i "had" a cat fitted cause it was taken off today in place of a de-cat and they told and showed me the cracks int he flange bit that joins the 2 together

my car is a 91 h reg and i also keep geting told that the down pipes are different for the cat and non cat versions is this true????
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Dec 14, 2005 10:05 am

yes they are different and if it had a cat then yes you need the cat downpipe.

whats wrong with the downpipe you have?
bradharris
Site Subscriber

Joined: 28 Oct 2005
Posts: 247

Posted: Wed Dec 14, 2005 10:53 am

erm they showed my that the flange bit that joins to the cat has cracks all the wah round and it is leaking air out before the joint as u can feel it so i after one befoer it goes completly sort of prepairing for the worst lol
astrojon007
Site Subscriber

Joined: 29 Mar 2005
Posts: 731

Posted: Wed Dec 14, 2005 12:20 pm

Surely you don't have to change downpipes if you put on a de-cat though. I've put on a de-cat and haven't changed the downpipe and all seems fine.
bradharris
Site Subscriber

Joined: 28 Oct 2005
Posts: 247

Posted: Wed Dec 14, 2005 1:37 pm

no the cracks are on the down pipe flange not the d-cat
mixpioneer
Site Subscriber

Joined: 29 Dec 2004
Posts: 395

Posted: Wed Dec 14, 2005 2:03 pm

gun gum Wink
bradharris
Site Subscriber

Joined: 28 Oct 2005
Posts: 247

Posted: Wed Dec 14, 2005 2:32 pm

thats what they have put round it for now but i wanna get it sorted before it gets worse
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Dec 15, 2005 1:10 am

get it welded up then grind it back.

The flange is pish on them. The bottom is to small and leaks easily even on new ones, build up the flange with weld it'll be much better.
bradharris
Site Subscriber

Joined: 28 Oct 2005
Posts: 247

Posted: Thu Dec 15, 2005 1:30 am

u reckon that will work???/ cause if it does it shall be done god this could save me a packet of dosh Very Happy chriss ill have to get u a beer one day
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Dec 15, 2005 1:36 am

get it welded up then get it ground down flush.

It does work.

As long as the welder isn't a complete muppet and uses superglue and bit of pepsi can! (I have seen that done on sills! lol) it'll work fine.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours