Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Clio 16v Mounts, Cambelt and PAS pupm.
Author Message
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Tue Dec 13, 2005 7:12 am

Just got back from viewing a Clio 16v but it has a few problems.

Firstly: No receipt of cambelt change, what is an average price for a cambelt change inc parts, VAT etc?.

Secondly: When driving the car and lifting off the gas the car would rock you a bit. Also the gearstick was moving about. So say you change gear, car would rock, then lucht down, gear stick would move about by an inch or so. Surely that isn't normal :/

Lastly: The PAS seemed to whine, even if you moved the steering only a 1/4 of a turn. The lad said the belt needs tightening ?

Any ideas or more info needed?.

Cheers.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Dec 13, 2005 7:17 am

Second: Rear engine mount has gone

Third: Check there's fluid in the bottle, if there is, tighten the belt.
Dan
Site Subscriber

Joined: 28 Jan 2005
Posts: 3547

Posted: Tue Dec 13, 2005 7:52 am

cambelt change is around the £400 mark around here
Rich1
Level 7 User

Joined: 21 Feb 2005
Posts: 224

Posted: Tue Dec 13, 2005 8:16 am

fook me! £400! its closer to 200 round here for an independat garage and thats on the books too!, some pleaces will do it off the books cheaper if you know the right people
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Tue Dec 13, 2005 8:22 am

Why not buy a kit and do it yourself - cost £85.

It's not that bad a job to do either.

If you just want to do the belt its a 20 minute job. and about £15.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Tue Dec 13, 2005 8:23 am

Ok cool.

Also the gearstick osrt of moved up and down too.

Would that deffo be a gearbox mounting?
Dan
Site Subscriber

Joined: 28 Jan 2005
Posts: 3547

Posted: Tue Dec 13, 2005 9:02 am

Doc, its a clio! its alot harder to do the belt.
huwwatkins
Site Subscriber

Joined: 10 Jun 2004
Posts: 2317

Posted: Tue Dec 13, 2005 1:59 pm

FincH wrote:
Ok cool.

Also the gearstick osrt of moved up and down too.

Would that deffo be a gearbox mounting?


Rear engine/gearbox dogbone mount.
Dan
Site Subscriber

Joined: 28 Jan 2005
Posts: 3547

Posted: Tue Dec 13, 2005 2:17 pm

i'll do the mounts for you
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Tue Dec 13, 2005 2:40 pm

How much Dan?.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Dec 14, 2005 12:41 am

its just the dog bone mount that will need doing. Dan can have that pleasure!

Belts on a clio are a nightmare.

19 is pretty straightforward, the clios a bugger.

You need to support the engine as you remove the engine mount, then you need a 7mm allen key (try finding one) to undo the centre bolt on the aux tensioner with no access.

The aux belt tensioner also normally loses its teeth so you can never tension it as normal.

Really bad crap setup.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Wed Dec 14, 2005 5:35 am

Ha ha.

Ok the dude said he's gonna get the cambelt and PAS belts changed and I might go to Dan for dog bone mount.

Cheers.
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours