Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Where's best to get a new PAS pump from?....
Author Message
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 2:00 am

Ah so the PAS whiney POS finaly seems to have died on me and I now have lovley heavy lumpy steering.

Anyways, where's best to get a replacement pump? I checked Euro Carparts and they had one for £103. GSF don't seem to stock one for the Valver and they're dickheads anyway.

Any idea how much from Renault? Can you get re-con units or best to buy new?

Also how much will it cost to be fitted? Looked in haynes and doesn't seem too hard for a trained mechanic (i.e. not me)

Cheers.
mals
Self Proclaimed Comic Genius

Joined: 04 Jul 2004
Posts: 3482

Posted: Thu Mar 02, 2006 2:01 am

If you want new Euro, if not just check the eBay
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Thu Mar 02, 2006 2:15 am

pump is the same on meganes as well and probably other renaults, so get one off a newer car if you can obviously
mals
Self Proclaimed Comic Genius

Joined: 04 Jul 2004
Posts: 3482

Posted: Thu Mar 02, 2006 2:20 am

If not sure ask the H! and send him some good karma! Wink
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 02, 2006 3:12 am

the pump is the same on the same on the 2l 16V megane but no other meganes.

Its a gay design, theres abotu 5/6 different pas pumps found on rens of the last 15 years.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 02, 2006 3:12 am

also it shouldn't be lumpy, thats says rack to me.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 6:46 am

Think I'm gonna buy new just to be on the safe side.

Well I say lumpy, basicaly it's really stiff but has a tiny bit where it works.

I'm assuming it's the pump as it's been noisy forever and now it has pissed PAS fluid all over the altenator and the floor Sad

This now means it's doutbful I'll be able to get the 2l Meggy BE that Chet has the head off Sad
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Thu Mar 02, 2006 7:04 am

the meggy BE will come with the PAS pump anyway wont it?

Chuck some of that Lucas stop leak stuff in.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 10:45 am

Nah the bottom end doesn't come with the pump and anyways, what's cheaper, new pump or buying and fitting a 2l BE.

I did want to eventualy convert the car to a manual rack. Typical you get an idea in your head and it all fecks up Sad

Also notice one of the rubber gaiters is leaking on the gearbox...leaking gearbox oil.

Geat week this has been:

Got a verbal warning at work
PC motherboard frys itself due to Creme Egg foil rapper getting sucked onto it
PAS pump goes
Split gearbox gaiter thing

Might stay at home tommorow...
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 02, 2006 10:46 am

the gearbox gaiter on the passenger side always leaks some oil.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 10:58 am

Oh right.

Well the box was fitted only about a month ago and I already had to top it up with 800ml of gearbox oil.

It's a whiney box too so no doubt that'll be fecked next.

The guy who fitted it has a 1.6 16v Meggy box spare, will that fit?

Also notice some play at the bottom of the steering colum, where the rubber gaiter is in the foot well. That a linkage or something? :/
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 02, 2006 12:21 pm

column bush is fecked. clio problem.

pas fecked clio problem

no probs like these on 19's.

meggy box will fit
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 1:29 pm

Colum bush...had to fix?

Aye they do suffer from a few problems these Clio's Sad

I still love them though Razz
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Mar 02, 2006 1:30 pm

get the column welded.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Thu Mar 02, 2006 2:57 pm

Ok.

Cheers Smile
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours