Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 what we all doing today then?
Author Message
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 3:16 am

after I sort things out in town I am off down to work on the cars.

Today the blue hatch is getting my attention me thinks.

I have lists for all the cars but the blue hatch hasn't been touched fror a while and i can sort out a few things, like

fit the lower pinchbolt on the nearside,
sort the oil pressure gauge out (I reckon wire to sender),
maybe flush the cooling system a few times,
look at the leaky rear drivers caliper,
change the handbrake cables

thats if i can be bothered to do it all.

I think its a bit to much to ask for today to, remove the dash, engine and ABS system.

If I get the cables off then I will put one onto the exec so it will then have a fully functioning handbrake.
Dan
Site Subscriber

Joined: 28 Jan 2005
Posts: 3547

Posted: Wed Mar 15, 2006 3:20 am

well, taking tab to the hospital later for an eye test, then ive got work. oh the joy.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 3:22 am

what time do you start work at?
Neal
Forum Moderator

Joined: 18 Feb 2004
Posts: 7432

Posted: Wed Mar 15, 2006 3:27 am

I'm doing the same thing I do everyday... planning to take over the world!

That and other office based tasks <sigh>
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Wed Mar 15, 2006 3:27 am

been to the doctors for a review on my knee. (still fucked) but things are looking up.

not doing anything to the cars as I'm at work.
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 3:29 am

Neal how are the plans coming?

Mine keep hitting a snag, which is money and soldiers tbh!

I wish I could just head straight down, but I need to go negociate with the government underlings before I can go to the cars.
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Wed Mar 15, 2006 3:36 am

LOL.

What you trying to say?lol
Dan
Site Subscriber

Joined: 28 Jan 2005
Posts: 3547

Posted: Wed Mar 15, 2006 3:46 am

supposed to start at 12, but ive told them i need to take her to the hospital.
Roger Red Hat
Site Subscriber

Joined: 13 Oct 2004
Posts: 4722

Posted: Wed Mar 15, 2006 4:19 am

im doin nothing part from lieing in bed

was having some really fucking scary dreams last night. woke me up in a sweat.

scared me so much i puked :/
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Wed Mar 15, 2006 4:22 am

Nice!

I'm back in work today, got a back log of paperwork, yey
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 4:24 am

I am now down here and abouit to start work!

Chet you knew that would happen!
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Mar 15, 2006 5:03 am

I am fighting a losing battle with computers in uni.
FincH
Site Subscriber

Joined: 05 Jan 2005
Posts: 569

Posted: Wed Mar 15, 2006 5:08 am

Been to college but teacher was in a car crash so got to go home early.

Came back to my dads and been playing around on Live For Speed editing the cars power figures. Can get the engines to rev to over 40,000Rpm Very Happy
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 5:20 am

well all the 16V's have been shuffled but the hatch is being a dick.

Its clutch stuck to the flywheel again so had to break that free.

then it won;t start back up without a jump so the battery is charging.

I have however got the drivers arch liner off with no problems, even the t20's in the arch came free easily!

Looking at the oil pressure sender wiring, its got the original white sender which may be the main problem!
1fast6
Level 5 User

Joined: 10 Jul 2005
Posts: 112

Posted: Wed Mar 15, 2006 5:46 am

Just watched Human Traffic and about to commence the cisco CCNP revision that is lurking..
JB
Mr Quoter-vator

Joined: 16 Feb 2004
Posts: 7405

Posted: Wed Mar 15, 2006 6:38 am

well i won the battle with the bastard computers...i knew i'd get the upper hand in the end!
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 7:00 am

I cleaned up the earths on the hatch and exec with the drill and wire brush, no more issues there then!

Hatches alt ouput has gone from 13.2V at 1krpm to 14.5V at 1krpm!

had a go at the oil pressure thing, it sort of works now, somwetimes, I think the sender needs replaced.

Gonna do the lower pinch bolt no methinks.

Also put hose clips etc on the hatch, its cooling system now doesn't leak, heater works well too.
Doc
Site Subscriber

Joined: 11 Feb 2005
Posts: 2929

Posted: Wed Mar 15, 2006 7:03 am

no more puddles under the hatch for a while then mate? lol
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Wed Mar 15, 2006 8:11 am

nope, shouldn't be anyway!

I have also refitted the front ns arch liner, replaced the broken ns rear liner, refitted the plug well plastic thing and plug cover, tidied out the boot, put the front mats back in the car, about to clear out the interior, fitted the rear ashtrays neo gave, bolted the rad fan back in ansd so on.

Not gone unde rit but the drive is manky as is the car.
Wicked Neo
FCS Event Manager

Joined: 04 Jan 2005
Posts: 3680

Posted: Wed Mar 15, 2006 11:12 am

been at work since 6am, got in 45 mins ago, showered and checking email, work was a bitch today, seems i managed to find every road to drive along today that has road works on it Sad
R1916S
Site Subscriber

Joined: 23 Jan 2005
Posts: 502

Posted: Wed Mar 15, 2006 2:13 pm

Finally we have planing permission and all to build a small extension on the house, work starts on Monday.

So I’ve been shifting the ton of assorted junk (car parts, old electric sockets, books, old slide photo’s? slide projector and all to temporary storage. (Don’t look just shift the stuff). Cool

Of course in the middle of all this I decided that the front shocks could need an upgrade. So stop by STAC in Antibes and walk out with a nice new set of Koni sport inserts for the front. Well two years ago I got Koni’s on the back but never got around to the front. Smile

Anyway I think the fronts are the original Renault shocks, they have a Renault stamp at least. So it’s out with the hacksaw and cut off the top off time.

Don’t know if any body has done this but the Koni’s have a lip 36-mm down so I should cut the original 30mm down from the top, and bang a 14mm hole in the bottom.

All good fun but if the misses catches me at it I’m dead. (Well not really but you no how it is). Wink

Can’t wait to feel the difference, but the adjustment is a pain as I think you have to get the spring off. The back ones you can adjust with the car jacked up but It’s a pain.

Apart from that I’m in the middle of a training program for my work, so its all go as usual Wink
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours