Retro-Renault Archive Forum Index  
SEARCH THE ARCHIVE FORUMS  •  Log in
Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website. 
 Dash Lights
Author Message
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Thu Sep 23, 2004 6:08 am

HI ALL

Right managed to get the plastic cowlings off and all the screws loose.

BUT i cant get mny hand behing the speedo panel, i can only get it 3 inches forward and theres not enough space to get my hand down the back to pull the speedo cable out of the back.

When i tilt it forward i can feel the cable tension increase and dont want to snap it.

Any ideas or advice??

Taken 4 screws out of the speedo panel, 2 top 2 bottom

Pics posted
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Thu Sep 23, 2004 6:55 am

use a long screwdriver, go in from the panel thats under the steerign column, you will see the cable, twist the driver to pop it off or use a pair of angle pliers under the display.
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Thu Sep 23, 2004 7:20 am

Hi

Took this picture from under the steering column, i can see the cable but just a tad frightened that im going to knacker the cable up, as im built like shrek!

By the term driver do you mean insert the screw driver into a join on the cable housing and twist?????

HELP, i need to go to NETTO!
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Sep 23, 2004 9:54 am

hi mate,
i believe you have a renault19 ,i have just done the same job a month ago ,its seriously easy once you know whats behind the panel . to get your hand through to the speedo cable switch you have to get the little panel thats supposed to be holding the manual choke switch (you probably dont have the switch but the plastic bit. its on the right side of the steering column adjuster thingy and 1 screw holds it ) yes get that out and put your right hand through the hole (its quite hard if you have thick wrists) but i managed to get to the speedo cable and turn the bastard and pull out while holding the ins panel with the other hand after that is easy ,the electric switches come out by pulling
good luck
schakal
Spammer

Joined: 27 Jul 2004
Posts: 5717

Posted: Thu Sep 23, 2004 9:56 am

by the way you dont need a screw driver to get the spedo cable out.just twist about 45 degrees and pull out .its easy
Chet T16
Retroholic

Joined: 12 Feb 2004
Posts: 5685

Posted: Thu Sep 23, 2004 10:18 am

I normally remove the bottom panel and the heater duct. You can get your hand up pretty easy then
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Thu Sep 23, 2004 10:34 am

<<<<<Gone to have a go!

Will report back asap
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Thu Sep 23, 2004 11:17 am

right

ive removed the heater duct and can get my hand actual on the cable now but cant get the cable to budge.

QUestion:

clockwise

Or

anticlockwise
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Thu Sep 23, 2004 12:04 pm

YES YES YES YES

Ive managed to get the speedo cable free and replaced the speedo bulbs. I can now see how fast i am going.

Now the problem is that i cant see how many revs im doing cause those bulbs have stopped working now!!!!!!

BLOODY CAR

Oh and the radiators started leaking at the bottom Sad
Chris H
Forum Moderator

Joined: 02 Mar 2004
Posts: 19978

Posted: Fri Sep 24, 2004 4:04 am

yopu don't actually twist it, your meant to squeeze the 2 tags togewther.

Even with nthe heater duct out my arm and hand are to big to fit in there.
SpeedFreak
Level 8 User

Joined: 07 Sep 2004
Posts: 328

Posted: Fri Sep 24, 2004 1:49 pm

Well ive eventually done it, after loads of cuts and grazes the jobs done. Tried it tonight and it looks a lot better, at least i can see how fast im going. Just one prob, looks like thr bulb behind the petrol gauge has blown, but i can survive without that as it gets enough light from the other bulbs PLUS if you think im going to try this again YOU CAN S*D OFF, that speedo cable was a nightmare.

Took aload of pics so will post soon.

Thanks Guys

Col
Display posts from previous:      


 Jump to:   




SPIDER ARCHIVE
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme :: All times are GMT - 7 Hours