 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
_G_
Level 3 User
Joined: 22 Mar 2006
Posts: 72
|
| Posted:
Mon May 01, 2006 1:42 pm |
|
Being trying to find information on this all night, with not much luck...
Basicly, i have a Clio RSI, with 238mm(i think) vented disks (Girling), am i right in thinking that to upgrade to the valvers 259mm disks, all i would need is the caliper carrier and not a new caliper. Then simply putting the bigger disks and pads back on, or am i just talking cod shite..? |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Mon May 01, 2006 2:42 pm |
|
no you are correct, you just need the discs and carrier. |
|
|
|
|
_G_
Level 3 User
Joined: 22 Mar 2006
Posts: 72
|
| Posted:
Mon May 01, 2006 3:02 pm |
|
Nice one for the confirmation Chris... another Q, what other Renaults use the same brakes as the 16v, just incase i cant find a valver in the scrapyard tomorrow.. |
|
|
|
|
_G_
Level 3 User
Joined: 22 Mar 2006
Posts: 72
|
| Posted:
Tue May 09, 2006 3:34 pm |
|
Sorry to get back on to this, but i cant find any valvers with brakes on at the minute.
But i have seen a 95 Laguna 16v, which looked like it had the bigger disks, would the disks and brackets be ok to use off this for a straight swap?
if so, what pads do i need..
Cheers |
|
|
|
|
Chris H
Forum Moderator
Joined: 02 Mar 2004
Posts: 19978
|
| Posted:
Wed May 10, 2006 12:00 am |
|
depends if its 259 or 262's the offsets a bit different. |
|
|
|
|
|
|
| |