 |
|
| Hello, you are currently browsing to Retro-Renault Archive which is a copy of our old forum. You cannot post replies in this forum. Please click here to go to the active website.
|
| Author |
Message |
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Thu Jun 08, 2006 7:58 am |
|
Pulled up in the drive the other day after taking a half hour drive back from Brighton. What I heard was a hiss.....hissss......hisss kinda noise, when I opened up the engine bay I came across what looked like a sprinkler system attatched to the head.....lol
This was the cause http://img272.imageshack.us/img272/553/scratch6pj.jpg
As some of you know Flipper (boss's mate) is breaking a ph2 19 and the thermostat and this T piece are all one, I'm assuming the ph2 part cannot be used with a ph1 head as the plugs seem to be in the wrong place and the apeture on the head is completely different. However Ren want £30 for a new one so a second hand ph1 T piece or info on using the ph2 kit would be very helpfull. |
|
|
|
|
Neal
Forum Moderator
Joined: 18 Feb 2004
Posts: 7432
|
| Posted:
Thu Jun 08, 2006 8:27 am |
|
just use the ph2 thermostat housing. It fits straight on and mates up with all your existing hoses. The ph2 thermostat housing has the 2 temp sensors mounted in it so you can take your pick whether you want to use those or your original pair mounted in the head. |
|
|
|
|
astrojon007
Site Subscriber
Joined: 29 Mar 2005
Posts: 731
|
| Posted:
Fri Jun 09, 2006 2:24 am |
|
cool, thanks for the info mate. |
|
|
|
|
|
|
| |